If the laser beam is not centered, use the laser beam adjustment wizard, or use the XY view
screen to center the laser dot.
Tap the detector area on the screen [1] to access the XY View.
Note
If the vertical view (V) is selected when the function Live Move function is started, only
the vertical condition will be displayed. Likewise, if the horizontal view (H) is selected,
then only the horizontal condition will be displayed.
After machines have been moved to within tolerance, tighten the foot bolts then tap
Tap
to remeasure and verify the Live Move results, and confirm new alignment con-
dition.
Shop for Fluke products online at:
MyFlukeStore
www.
On-board help
1.888.610.7664
.com
.