Table of Contents
Advertisement
(Pairing Your Wireless Sensors,
The foot pod is self-calibrating, but you can improve
the accuracy of the speed and distance data with a
few outdoor runs using GPS.
1 Stand outside for 5 minutes with a clear view of
the sky.
2 Start a running activity.
3 Run on a track without stopping for 10 minutes.
4 Stop your activity, and save it.
Based on the recorded data, the foot pod
calibration value changes, if necessary. You should
not need to calibrate the foot pod again unless
your running style changes.
Calibrating Your Foot Pod Manually
Before you can calibrate your device, you must pair
your device with the foot pod sensor
Wireless Sensors,
page 45).
Manual calibration is recommended if you know your
calibration factor. If you have calibrated a foot pod
with another Garmin product, you may know your
calibration factor.
1 Hold MENU.
2 Select Settings > Sensors & Accessories�
3 Select your foot pod.
4 Select Cal� Factor > Set Value�
5 Adjust the calibration factor:
• Increase the calibration factor if your distance is
too low.
• Decrease the calibration factor if your distance
is too high.
Setting Foot Pod Speed and Distance
Before you can customize the foot pod speed and
distance, you must pair your device with the foot pod
sensor
(Pairing Your Wireless Sensors,
You can set your device to calculate speed and
distance using your foot pod data instead of GPS data.
1 Hold MENU.
2 Select Settings > Sensors & Accessories�
3 Select your foot pod.
4 Select Speed or Distance�
5 Select an option:
• Select Indoor when you are training with GPS
turned off, usually indoors.
• Select Always to use your foot pod data
regardless of the GPS setting.
tempe
The tempe is an ANT+ wireless temperature sensor.
You can attach the sensor to a secure strap or loop
where it is exposed to ambient air, and therefore,
provides a consistent source of accurate temperature
data. You must pair the tempe with your device to
display temperature data from the tempe.
46
page 45).
(Pairing Your
page 45).
Device Information
D2 Delta PX Specifications
Rechargeable, built-in lithium-ion
Battery type
battery
Water rating
10 ATM*
Operating
From -20º to 45ºC (from -4º to
and storage
113ºF)
temperature range
Charging
From 0º to 45ºC (from 32º to
temperature range
113ºF)
*The device withstands pressure equivalent to a depth of 100 m. For
more information, go to Garmin.com.sg/legal/waterrating.
Battery Information
The actual battery life depends on the features
enabled on your device, such as activity tracking,
wrist-based heart rate, smartphone notifications, GPS,
internal sensors, and connected sensors.
Battery Life
Smartwatch mode with activity
Up to 18 days
tracking and 24/7 wrist-based heart
rate monitoring
GPS mode with wrist- based heart
Up to 30 hours
rate
GPS mode with wrist- based heart
Up to 18 hours
rate (SpO2)
GPS mode with wrist- based heart
Up to 11 hours
rate and streaming music
UltraTrac GPS mode with gyro-based
Up to 64 hours
dead reckoning
Data Management
NOTE: The device is not compatible with Windows 95,
98, Me, Windows NT
, and Mac
®
Disconnecting the USB Cable
If your device is connected to your computer as a
removable drive or volume, you must safely disconnect
your device from your computer to avoid data loss. If
your device is connected to your Windows computer
as a portable device, it is not necessary to safely
disconnect the device.
1 Complete an action:
• For Windows computers, select the Safely
Remove Hardware icon in the system tray, and
select your device.
• For Apple computers, select the device, and
select File > Eject�
2 Disconnect the cable from your computer.
Deleting Files
If you do not know the purpose of a file, do not delete
Mode
OS 10.3 and earlier.
®
NOTICE
Device Information
Advertisement
Table of Contents
