Using Electronic Shifters; Situational Awareness; Foot Pod; Improving Foot Pod Calibration - Garmin DESCENT MK2I Owner's Manual

Using Electronic Shifters

Before you can use compatible electronic shifters, such as Shimano
your device (Pairing Your Wireless Sensors, page
the Data Screens, page 107). The Descent Mk2i device displays current adjustment values when the sensor is in
adjustment mode.

Situational Awareness

Your Descent device can be used with the Varia Vision
improve situational awareness. See the owner's manual for your Varia device for more information.
NOTE: You may need to update the Descent software before pairing Varia devices
the Smartphone Apps, page

Foot Pod

Your device is compatible with the foot pod. You can use the foot pod to record pace and distance instead of
using GPS when you are training indoors or when your GPS signal is weak. The foot pod is on standby and
ready to send data (like the heart rate monitor).
After 30 minutes of inactivity, the foot pod powers off to conserve the battery. When the battery is low, a
message appears on your device. Approximately five hours of battery life remain.

Improving Foot Pod Calibration

Before you can calibrate your device, you must acquire GPS signals and pair your device with the foot pod
(Pairing Your Wireless Sensors, page
The foot pod is self-calibrating, but you can improve the accuracy of the speed and distance data with a few
outdoor runs using GPS.
1 Stand outside for 5 minutes with a clear view of the sky.
2 Start a running activity.
3 Run on a track without stopping for 10 minutes.
4 Stop your activity, and save it.
Based on the recorded data, the foot pod calibration value changes, if necessary. You should not need to
calibrate the foot pod again unless your running style changes.

Calibrating Your Foot Pod Manually

Before you can calibrate your device, you must pair your device with the foot pod sensor
Sensors, page 125).
Manual calibration is recommended if you know your calibration factor. If you have calibrated a foot pod with
another Garmin product, you may know your calibration factor.
1 Hold MENU.
2 Select Sensors & Accessories.
3 Select your foot pod.
4 Select Cal. Factor > Set Value.
5 Adjust the calibration factor:
• Increase the calibration factor if your distance is too low.
• Decrease the calibration factor if your distance is too high.
126
125). You can customize the optional data fields
53).
125).
® Di2 shifters, you must pair them with
™
device, Varia smart bike lights, and rearview radar to
™ ™
(Customizing
(Updating the Software Using
(Pairing Your Wireless
Wireless Sensors