Calibrating Your Foot Pod Manually; Setting Foot Pod Speed And Distance; Using An Optional Bike Speed Or Cadence Sensor; Training With Power Meters - Garmin FORERUNNER 945 LTE Owner's Manual

Calibrating Your Foot Pod Manually

Before you can calibrate your device, you must pair your device with the foot pod sensor
Sensors, page 77).
Manual calibration is recommended if you know your calibration factor. If you have calibrated a foot pod with
another Garmin product, you may know your calibration factor.
1 From the watch face, hold
2 Select Settings > Sensors & Accessories.
3 Select your foot pod.
4 Select Cal. Factor > Set Value.
5 Adjust the calibration factor:
• Increase the calibration factor if your distance is too low.
• Decrease the calibration factor if your distance is too high.

Setting Foot Pod Speed and Distance

Before you can customize the foot pod speed and distance, you must pair your device with the foot pod sensor
(Pairing Your Wireless Sensors, page
You can set your device to calculate speed and distance using your foot pod data instead of GPS data.
1 Hold .
2 Select Sensors & Accessories.
3 Select your foot pod.
4 Select Speed or Distance.
5 Select an option:
• Select Indoor when you are training with GPS turned off, usually indoors.
• Select Always to use your foot pod data regardless of the GPS setting.

Using an Optional Bike Speed or Cadence Sensor

You can use a compatible bike speed or cadence sensor to send data to your device.
• Pair the sensor with your device
• Set your wheel size (Wheel Size and Circumference, page
• Go for a ride (Starting an Activity, page

Training with Power Meters

• Go to buy.garmin.com
Vector ).
™
• For more information, see the owner's manual for your power meter.
• Adjust your power zones to match your goals and abilities
• Use range alerts to be notified when you reach a specified power zone
• Customize the power data fields

Using Electronic Shifters

Before you can use compatible electronic shifters, such as Shimano
your device (Pairing Your Wireless Sensors, page
the Data Screens, page 81). The Forerunner device displays current adjustment values when the sensor is in
adjustment mode.
78
.
77).
(Pairing Your Wireless Sensors, page
4).
for a list of ANT+ sensors that are compatible with your device (such as Rally
(Customizing the Data Screens, page
77). You can customize the optional data fields
77).
113).
(Setting Your Cycling Power Zones, page
(Setting an Alert, page
81).
Di2 shifters, you must pair them with
® ™
(Pairing Your Wireless
and
™
26).
83).
(Customizing
Wireless Sensors