Customizing The Widget Loop; Altimeter; Temperature; Metar - Garmin D2 DELTA PX Owner's Manual

weather forecast.
Xero™ bow sight: Displays laser location information
when you have a Xero bow sight paired with your
D2 device.

Customizing the Widget Loop

You can change the order of widgets in the widget
loop, remove widgets, and add new widgets.
1 Hold MENU.
2 Select Settings > Widgets�
3 Select a widget.
4 Select an option:
• Select Reorder to change the location of the
widget in the widget loop.
• Select Remove to remove the widget from the
widget loop.
5 Select Add Widgets�
6 Select a widget.
The widget is added to the widget loop.

Altimeter

Alert altitude
1
Pressure altitude
2
Barometric pressure
3

Temperature

Analog temperature
1
Digital temperature
2
Density altitude from a compatible temperature
3
sensor, such as the tempe™ sensor
40

METAR

Airport identifier
1
Aviation flight category
2
Wind direction, speed, and gusts
3
Visibility in statute miles
4
Sky conditions
5
Weather conditions
6

VIRB Remote

The VIRB remote function allows you to control your
VIRB action camera using your device. Go to
com.sg/minisite/virb to purchase a VIRB action
camera.
Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you
must enable the remote setting on your VIRB camera.
See the VIRB Series Owner's Manual for more
information. You must also set the VIRB widget to be
shown in the widget loop
page 40).
1 Turn on your VIRB camera.
2 On your D2 device, select UP or DOWN from the
watch face to view the VIRB widget.
3 Wait while the device connects to your VIRB
camera.
4 Select .
5 Select an option:
• To record video, select Start Recording�
The video counter appears on the D2 screen.
• To take a photo while recording video, select
DOWN.
• To stop recording video, select
• To take a photo, select Take Photo�
• To change video and photo settings, select
Settings�
Controlling a VIRB Action Camera During an Activity
Before you can use the VIRB remote function, you
must enable the remote setting on your VIRB camera.
See the VIRB Series Owner's Manual for more
information. You must also set the VIRB widget to be
shown in the widget loop
page 40).
1 Turn on your VIRB camera.
2 On your D2 device, select UP or DOWN from the
watch face to view the VIRB widget.
Garmin.
(Customizing the Widget Loop,
.
(Customizing the Widget Loop,
Customizing Your Device