General Mounting Considerations; Additional Guarding; Mechanical Installation - Omron F3S-TGR-CL2 Installation And Operation Manual

General mounting considerations

9-3 General mounting considerations
9-3-1

Additional Guarding

9-3-2

Mechanical installation

Areas of access to the point of hazardous operation not guarded by the F3S-
TGR-CL system must be protected by suitable means such as a fixed barrier
guard, an interlocked guard or a safety mat system.
D s
Hazard
Zone
Supplemental
Guarding
Mechanical
Example
Barrier
F3S-TGR-CL point of
operation guarding
The F3S-TGR-CL system is mechanically installed by using the T-slots on the
two sides or the back-side of the housing.
Use the movable bolts, washers, growers and nuts to fix the mounting brack-
ets as shown in the picture
ID Description
1 movable M6 bolt
2 fixing braket
3 M6 washer
4 M6 Grower
5 M6 nut
Supplemental
Guarding
F3S-TGR-CL 2-Axis guarding
Section 9-3
Supplemental
Guarding
25