Table of Contents
Advertisement
!WARNING
6-1
Access to the selector switches
6-1-1
Selector switch setting
12
Make sure that foreign objects such as water, oil, or dust do not enter the
inside of the F3S-TGR-CL system while the cover for the selector switches is
open.
The switches are located behind a cover on both the transmitter and receiver.
The covers are opened by loosening two retaining screws (see illustration
below).
Disconnect the power supply before changing the switch settings.
= dip-switch level position
OFF is the upper position and ON is the lower position.
Note Make sure to always set switches in both banks to the same position
(except switch 7 on the receiver).
Setting F3S-TGR-CL features
SECTION 6
1
2
3
4
5
6
OFF
ON
1
2
3
4
5
6
OFF
ON
7
8
7
8
Advertisement
Table of Contents
