Table of Contents
Advertisement
6. Using the Fax Function
• The search result will contain destinations that match the predefined search conditions.
• If a record that has been found contains multiple destinations, the first of those destinations will be
used.
• For details about registering LDAP servers, see p.440 "Programming the LDAP server".
• For details about specifying the search conditions, see p.446 "Specifying the LDAP Address
Search Conditions".
Specifying the destination using the broadcast function
You can send a fax to multiple destinations simultaneously. You can broadcast faxes to a maximum of
100 destinations (including both normal fax destinations and Internet Fax destinations).
Faxes are sent to destinations in the order they were specified.
1.
Press the [Facsimile] key.
2.
Add a destination by using one of the following methods:
• To add a Quick Dial destination: press a corresponding One Touch button.
• To add a Speed Dial destination: press the [Address Book] key, select [Search Address
Book], select a destination, and then press the [OK] key.
• To add a manually-specified destination: confirm that [No.key] is pressed, and then enter the
destination fax number using the number keys.
• To add a destination from an LDAP server: follow the procedure in "Specifying the destination
from an LDAP server".
3.
Press the [OK] key.
Press [List] to see the list of destinations that have been added so far.
Go back to step 2 to add further destinations.
218
CMF133
Advertisement
Table of Contents
