Table of Contents
Advertisement
2.
Press the [Scanner] key.
"Loading..." appears on the display. Wait until the display changes to show "Save Scn Data to
USB" (the duration depends on your USB flash disk).
3.
Place the original on the exposure glass or in the ARDF/ADF.
If necessary, configure advanced scan settings.
4.
Press the [Start] key.
Depending on the machine's setting, you will see the following screen on the display.
• When in black-and-white scanning mode:
• When in color or gray scale scanning mode:
CMF132
CMF141
Scanning Using the Control Panel
189
Advertisement
Table of Contents
