Table of Contents
Advertisement
Basic Operation in Copier Mode
This section describes the basic procedure for making photocopies.
• The original in the ARDF or ADF takes precedence over the original on the exposure glass if you
place originals both in the ARDF/ADF and on the exposure glass.
1.
Press the [Copy] key.
2.
Place the original on the exposure glass or in the ARDF/ADF.
If necessary, configure advanced photocopy settings.
3.
To make multiple copies, enter the number of copies using the number keys.
4.
Press the [Start] key.
If you are using the Type 2 model, depending on the machine's settings, "Set Back Side" appears
on the screen when using the exposure glass.
• If you want to copy the back side of the original, proceed to the next step.
• If you want to end the job, press [ ]. A copy will be output.
5.
Turn over the original on the exposure glass, and then press the [Start] key.
A 2-sided copy will be output, and "Set Front Side" appears on the screen.
CMF131
CMF141
Basic Operation in Copier Mode
153
Advertisement
Table of Contents
