Table of Contents
Advertisement
Message
A non-supported print cartridge
Indep.Sply.Prt.Cart.
is installed.
Paper has been jammed in the
Internal Misfeed
machine.
Memory has almost reached
Memory Almost Full
capacity during sort copy.
Memory Overflow
Causes
• The data is too large or
complex to print.
• If you try to print a Locked
Print file stored in the
machine with the printer
driver's [Resolution] set to
[1200 × 600 dpi] or
higher in the [Print Quality]
tab, printing may be
canceled depending on
the machine's current
memory usage.
Error and Status Messages on the Screen
Solutions
Remove and replace it with a print
cartridge specified by an authorized
dealer.
Remove the jammed paper. See p.365
"Removing Printing Jams".
If several originals are still to be scanned,
it is recommended to start printing now,
and copy the remaining originals
separately. If originals are being scanned
from the ARDF or ADF, remove any
remaining pages from the ARDF or ADF.
• Select [600 × 600 dpi] in
[Resolution] under [Printer Features]
to reduce the size of data. See p.304
"Printer Feature Settings".
• If using the PCL6 printer driver, set
[Resolution] in [Print Quality] to [600
× 600 dpi]. If using the PostScript 3
printer driver, set [Print Quality:] in
[Graphics] to [600 × 600 dpi].
• Print or delete other Locked Print files
in the machine, and then print the
Locked Print file that the machine
failed to print. Alternately, resend the
Locked Print file to the machine with
[Resolution] set to [600 × 600 dpi],
and then print the Locked Print file.
403
Advertisement
Table of Contents
