Table of Contents
Advertisement
F1
0D
The data is output as:
4567890ABCDEFGHIJ
<CR>
F6—Move the cursor backward a number of characters
Move the cursor back "nn" characters from current cursor position.
Syntax = F6nn where nn is the numeric value (00-99) for the number of characters
the cursor should be moved back.
F7—Move the cursor to the beginning
Move the cursor to the first character in the input message. Syntax = F7.
FE and F7 Example: Manipulate bar codes that begin with a 1
Search for bar codes that begin with a 1. If a bar code matches, move the cursor
back to the beginning of the data and send 6 characters followed by a carriage
return. Using the bar code above:
Command string: FE31F7F2060D
FE
31
F7
F2
06
0D
The data is output as:
123456
<CR>
EA—Move the cursor to the end
Move the cursor to the last character in the input message. Syntax = EA.
74
"Send all characters" command
Hex value for a CR
"Compare characters" command
Hex value for 1
"Move the cursor to the beginning" command
"Send a number of characters" command
Number of characters to send
Hex value for a CR
N4680 2D Decoded Scan Engine User Guide
Advertisement
Table of Contents
