Table of Contents
Advertisement
CTS/RTS Emulation
ACK/NAK Mode
Remote MasterMind™ for USB
When using a USB interface, you may wish to configure your scanner to communi-
cate with Remote MasterMind Scanner Management Software (ReM). Scan the
ReM On bar code to communicate with ReM. To disable this capability, scan ReM
Off.
Keyboard Country Layout
If your interface is USB Keyboard or Keyboard Wedge, your keyboard layout default
is a US keyboard. To change this layout, refer to the chart below for your keyboard
country. Scan the appropriate bar code below to change the layout.
By default, national character replacements are used for the following characters:
#$@[\]^'{|}~ See
view the character replacements for each country.
10
CTS/RTS Emulation On
ACK/NAK Mode On
ReM Off
ISO 2022/ISO 646 Character Replacements
N4680 2D Decoded Scan Engine User Guide
* CTS/RTS Emulation Off
* ACK/NAK Mode Off
*ReM On
on page A-222 to
Advertisement
Table of Contents
