Table of Contents
Advertisement
CHAPTER
1
GET STARTED
Introduction
The N4680 bar code scan engine is a fully decoded, compact 2D scan engine that
uses Honeywell's latest imaging and decoding technology. It is available in either
RS-232 TTL serial or USB versions with industry standard 12-pin ZIF connector. It
is a drop-in replacement for Honeywell's N3680.
About This Manual
This User Guide provides demonstration and programming instructions for the
N4680 2D scan engine.
Honeywell's bar code scan engines are factory programmed for the most common
terminal and communications settings. If you need to change these setting, pro-
gramming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpack Your Device
After you open the shipping carton containing the OEM scan engine(s), take the
following steps:
•
Check for damage during shipment. Report damage immediately to the carrier
who delivered the carton.
•
Make sure the items in the carton match your order.
•
Save the shipping container for later storage or shipping.
N4680 2D Decoded Scan Engine User Guide
1
Advertisement
Table of Contents
