Table of Contents
Advertisement
out duration (from 0-300,000 milliseconds) by scanning digits on the
Programming Chart
ms.
Snap & Ship Trigger Mode
Use the Snap and Ship trigger mode to take a picture and send it to the host. The
image will be sent to the host as a BMP file. This mode does not decode bar codes.
Presentation Modes
Presentation Mode
Presentation Mode uses ambient light and scan engine illumination to detect bar
codes. When in Presentation Mode, the LEDs remain dim until a bar code is pre-
sented to the scan engine, then the aimer turns on and the LEDs turn up to read
the code. If the light level in the room is not high enough, Presentation Mode may
not work properly.
Scan the following bar code to program your scan engine for Presentation Mode.
Streaming Presentation™ Mode
When in Streaming Presentation mode, the scan engine's aimer goes out after a
short time, but the scan illumination remains on all the time to continuously
search for bar codes. Two modes are available, Normal and Enhanced. Normal
mode offers good scan speed and the longest working ranges (depth of field).
N4680 2D Decoded Scan Engine User Guide
inside the back cover, then scanning Save. Default = 30,000
Read Time-Out
Snap & Ship
Presentation Mode
35
Advertisement
Table of Contents
