Interfunction Delay; Intermessage Delay - Honeywell N4680 User Manual

Interfunction Delay

An interfunction delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each control character in the message string.
Scan the Interfunction Delay bar code below, then scan the number of 5ms
delays, and the Save bar code using the
of this manual.
To remove this delay, scan the Interfunction Delay bar code, then set the number
of delays to 0. Scan the Save bar code using the
back cover of this manual.

Intermessage Delay

An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay bar code
below, then scan the number of 5ms delays, and the Save bar code using the
Programming Chart
To remove this delay, scan the Intermessage Delay bar code, then set the number
of delays to 0. Scan the Save bar code using the
back cover of this manual.
64
Prefix Scanned Data
STX 1 HT 2 3 4 5
Interfunction Delays
Interfunction Delay
inside the back cover of this manual.
1st Scan Transmission
Intermessage Delay
Intermessage Delay
N4680 2D Decoded Scan Engine User Guide
Programming Chart
Suffix
CR LF
Programming Chart
2nd Scan Transmission
Programming Chart
inside the back cover
inside the
inside the