Other Programming Selections - Honeywell N4680 User Manual

Step 7.

Other Programming Selections

•
•
•
•
N4680 2D Decoded Scan Engine User Guide
Scan Save to save your data format, or Discard to exit without saving your
changes.
Enter Data Format
Discard
Clear One Data Format
This deletes one data format for one symbology. If you are clearing the primary
format, scan 0 from the
manual. If you are clearing an alternate format, scan 1, 2, or 3, depending on the
format you are clearing. Scan the Terminal Type and Code I.D. (see
Charts on page 213), and the bar code data length for the specific data format
that you want to delete. All other formats remain unaffected.
Clear all Data Formats
This clears all data formats.
Save to exit and save your data format changes.
Discard to exit without saving any data format changes.
Clear One Data Format
Save
Programming Chart inside the back cover of this
Clear All Data Formats
Save
Symbology
Discard
67