Table of Contents
Advertisement
GS1 DataBar Limited On/Off
GS1 DataBar Limited Redundancy
If you are encountering errors when reading GS1 DataBar Limited bar codes, you
may want to adjust the redundancy count. Redundancy adjusts the number of
times a bar code is decoded before transmission, which may reduce the number of
errors. Note that the higher the redundancy count, the longer it will take to decode
the bar code. To adjust the redundancy, scan the GS1 DataBar Limited Redun-
dancy bar code below, then scan a redundancy count between 0 and 10 on the
Programming
GS1 DataBar Expanded
< Default All GS1 DataBar Expanded Settings >
GS1 DataBar Expanded On/Off
128
* On
Chart. Then scan the Save bar code. Default = 0.
* On
GS1 DataBar Limited
Redundancy
N4680 2D Decoded Scan Engine User Guide
Off
Off
Advertisement
Table of Contents
