Each bar code above also programs the following suffixes for each symbology:
Symbology
EAN 8
EAN 13
UPC A
UPC E
USB PC or Macintosh Keyboard
Scan one of the following codes to program the scan engine for USB PC Keyboard
or USB Macintosh Keyboard. Scanning these codes also adds a CR suffix.
USB HID
Scan the following code to program the scan engine for USB HID.
USB Serial
Scan the following code to program the scan engine to emulate a regular RS232-
based COM Port. If you are using a Microsoft® Windows® PC, you will need to down-
load a driver from the Honeywell website (www.honeywellaidc.com). The driver will
use the next available COM Port number. Apple® Macintosh computers recognize
the scan engine as a USB CDC class device and automatically use a class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
N4680 2D Decoded Scan Engine User Guide
Suffix
0C
16
0D
0A
USB Japanese Keyboard (PC)
USB HID
USB Serial
Symbology
Code 39
Interleaved 2 of 5
Code 128
Code 39
Suffix
00 0A 0B
00 0D 0B
00 18 0B
00 0A 0B
USB Keyboard (Mac)
9