Table of Contents
Advertisement
the number of Data Matrix bar codes determined by information encoded in those
bar codes. Once the proper number of codes is reached, the data is output in the
order specified in the bar codes. Default = On.
Data Matrix Code Page
Data Matrix Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be because the
bar code being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the bar code below,
select the code page with which the bar codes were created (see
Character Replacements
from the
characters should then appear properly.
Grid Matrix
<Default All Grid Matrix Settings>
Grid Matrix On/Off
N4680 2D Decoded Scan Engine User Guide
* On
on page 222), and scan the value and the Save bar code
Programming Chart
On
on the inside the back cover of this manual. The data
Data Matrix Code Page
Off
ISO 2022/ISO 646
* Off
143
Advertisement
Table of Contents
