Model 5340A
Operation
3-23. INPUT CABLE CONSIDERATIONS
3-24. Consideration should be given to input cable losses
6-foot RG-214/U coaxial cabIe has about 15 dB loss a t 18
consideration along with the sensitivity specifications given in Table 1-3.
3-25. For low capacity input measurements, a 1O:l low capacity oscilloscope probe
BNC
can be used on the
connector for frequency inputs up to approximately 100 MHz.
3-26. CONTROLS, INDICATORS, AND CONNECTORS
3-27.
Figure 3-3 describes the front panel controls, indicators, and connectors. Figure 3-4
describes the rear panel connectors and controls.
3-28. OPERATING PROCEDURES
3-29.
Figure 3-5 illustrates the operating procedures.
Figure 3-6.
3-4
at
higher frequencies. For example, a
Such losses should be taken into
(HP
Self check procedures are givei