HP 5340A Operating And Service Manual page 166

Model 5340A
Manual Changes and Options
Table 6-1, A14 Replaceable Parts:
Change series number for 05340-60011 (A14) to Series 1236A.
Change A14R1 and A14R2 to 0757-0893 RFXD FLM 51 OHM 2% 1/8W, 28480, 0757-0893.
Page 8-13, Figure 8-8, A2 Schematic Diagram:
Change A2A4C20 and A2A4C22 to 620PF.
Change A2A4C21 to 74PF.
Change A2A4L8 and A2A4L10 to O.1UH.
Change A2A4L9 to 1UH.
Change series number
Delete C8.
Page 8-17, Figure 8-10, A4 Schematic Diagram:
Change A4R22 to 2200 OHMS.
Change series number a t top of schematic to Series 1220A.
Page 8-37, Figure 8-20, A14 Schematic Diagram:
Change A14R1 and A14R2 to 51 OHMS.
Change series number at top of schematic to Series 1236A.
CHANGE 2
Page 6-6, A2A3 Parts List:
Change A2A3R1 to 0757-0963 R F X D FLM 43K OHM, 2%, 1/8W, 28480,0757-0963.
Page 8-13, Figure 8-8:
Change A2A3R1 to 43K.
Page 6-32, A33 Parts List:
Change A33CR1 to 1901-0027, Diode:Silicon 0.75A 400PIV, 04713, SR1358-9.
Add A33CR2, CR3, CR4; 1901-0027, Diode:Silicon 0.75A 400PIV, 04713, SR1358-9.
Change part number of T2 to 9100-3021.
Page 8-77, Figure 8-35, A33 Power Supply:
Replace schematic and component locator with Figure 7-9 a n d 7-10.
CHANGE 3
Table 6-1, A17 Replaceable Parts:
Change A17AlC1 and C2 to 0180-0228, Capacitor;
Change A17AlC5 through C7, C11, C12 to 0180-0197, Capacitor; FXD 2.2 U F
Change A17AlL3 to 9140-0158, Coil, FXD, Molded R F Choke, 1 UH lo%, 24226, 10/101.
Change A17AlR1 to 0698-5426, Resistor 10K lo%, .125W CC Tubular, 01121, BB1031.
Change A17AlR14 to 0698-5996, Resistor 560 OHM 5% .125W CC Tubular, 01121, BB5615.
Add A17AlE1, E3, 9170-0029, Core Magnetic, Shielding Bead, .1380D .047, 02114,
Change A17A1 board series number to Series 1320A.
Figure 8-23, A17 Schematic Diagram:
Change A17AlCl and C2 to 22 UFD.
Add A17AlC21 2.2 PF from U5B pin
Change A17AlR1 to 10K ohms.
Change A17AlR14 to 560 ohms.
Delete C22 and C23.
Change A17A1 board series number to 1320A.
CHANGE 4
Table 6-1, A13 Replaceable Parts:
Change A13 board series oumber to 1220A.
Delete A13R39 and description.
Change A13R3
to
Figure 8-19, A13 Schemadic Diagram:
Change A13R3 to 56' ohms.
Delete A13R39, connect C4 directly to U1A pin 1.
7-2
at top of schematic for A2A4 to Series 1220A.
11 to ground.
FXD UF
22