HP 5340A Operating And Service Manual page 17

GENERAL (CONTINUED)
Dimensions:
NOTE
TO E l A RACK HEIGHT
APRON
Power cord 7% ft (200 cm), NEMA plug (HP Part Number 8120-1378)
Accessories Furnished:
Accessories Available:
Packard computers.
Calculator.
ASCII (Option 011) to parallel BCD converter K01-5340A.
Rear Panel Connectors (Option 002)
This option provides input connectors on the rear panel. Input specifications remain the
same. Input 1 (Type N) is on the rear panel in place of installation on the front panel.
Input 2 (BNC) is available on the front and rear panels. Input impedance is reduced
to 5012.
Remote Programming and Digital Output (Option 011)
Option 011 adds the capability of digital outputting and remote programming
OUTPUT. The TTL and DTL compatible, bi-directional bus consists of eight data lines
plus seven status and control lines. Both program and output information are seven-bit
ASCII (USA Standard Code for Information Interchange) characters. They are passed
over the data lines on a character-serial basis.
Connector: 24-pin female Amphenol #57-20240-2, H P #1251-3283.
Mating connector male, Amphenol #57-10240, HP #1251-0389.
Table 1-3. Specifications (Continued)
Model 5340A
General Information
via a
1-5