Siemens SIMATIC IPC RW-543A Operating Instructions Manual page 99

SATA And RST Configuration
When you enter the BIOS Setup, the BIOS automatically detects the presence of SATA devices.
If no SATA device is installed to the corresponding SATA port, the SATA Port items show
Empty.
System Function description
parameters
M.2 NVMe Enable or disable control the PCI ExpressRoot Port.
SATA
Enable or disable the SATA port SATA6G_1.
Controller(s)
SATA Mode Determines how SATA controller(s) operate.
Selection
The following options show only when "SATA Mode Selection" = "[Intel RST With Intel Optane System Acceleration]".
SATA Interrupt Selection
• RST
SATA1∼4 Enable or disable the SATA1 Port 1∼4.
Port
M.2 SATA Enable or disable the M.2 SATA Port.
Port
PCI Express Configuration
In the PCI Express Configuration page, you can configure the onboard devices.
System parameters
PCIE_16X_SLOT1
PCIE_16X_SLOT1
Speed
PCIE_16X_SLOT2
(MaxWidth 8x)
SIMATIC IPC RW-543A
Operating Instructions, 03/2023, A5E52332059-AA
Function description
Enable or disable the PCIE_16X_SLOT1.
Configure PEG 0:1:0 Max Speed.
Enable or disable the PCIE_16X_SLOT2.
BIOS description
11.3 Advanced menu
Configuration Default setting
options
[Enabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
[AHCI]
• [AHCI]
• [Intel RST With
Intel Optane
System
Acceleration]
[MSIX]
• [MSIX]
• [MSI]
• [Legacy]
[Enabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
Configuration Default setting
options
[Enabled]
• [Enabled]
• [Disabled]
[Auto]
• [Auto]
• [Gen1]
• [Gen2]
• [Gen3]
[Enabled]
• [Enabled]
• [Disabled]
99