Jumpers - Siemens SIMATIC IPC RW-543A Operating Instructions Manual

A.1.3

Jumpers

Electrostatic sensitive devices (ESD)
The motherboard contains electronic components which can be destroyed by electrostatic
charges. This can result it in malfunctions and damage to the machine or plant.
Always completely disconnect to the power cord from your motherboard when you are
working on it. Do not make connections while the power is on, because a sudden rush of
power can damage the sensitive electronic components.
Always ground yourself to remove any static charge before touching the board. Modern
electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a static-dissipative surface or in a static-
shielded bag when they are not in the chassis.
Improper operations on the motherboard may result in substantial damage to the
motherboard or endanger the operator
• Do not remove or ruin the motherboard serial number labels.
• Wear electrostatic discharge (ESD) wrist strap or gloves when handling or touching the
• When handling the motherboard, avoid to touch any metal leads or connectors.
• Always unplug the AC power cord from the power outlet before you installing
• Place the motherboard on an anti‐static pad or in a electrostatic shielding container
• Turn off the power supply before you removing the power supply cable from the
• Before turning on the power supply, check if the input voltage setting follows
• Before operating the motherboard, make sure that the cables and the
• Make sure you securely attached the hardware components to the motherboard
• The screws are not allowed to connect with motherboard circuit or components. The
• Do not leave the screws or the metal components on the motherboard or inside of the
SIMATIC IPC RW-543A
Operating Instructions, 03/2023, A5E52332059-AA
WARNING
WARNING
These labels and the serial numbers are required for warranty validation.
motherboard.
or removing the motherboard.
during the operation.
motherboard.
the local voltage standard.
power connectors of all the attached
hardware components are connected. Turning on the power before you connect them,
the motherboard and the system components may get damaged and injure operator.
connectors/ slots/ sockets.
motherboard can be damaged by this action.
chassis.
Hardware description
A.1 Motherboard
113