Siemens SIMATIC IPC RW-543A Operating Instructions Manual page 101

System parameters
The following options show only when "PCI1&PCI2 SLOTS" = Enabled.
• PCI Speed
Detect Non-
•
Compliance
Device
MiniPCIE
The following options show only when "MiniPCIE" = Enabled.
• PCIe Speed
Detect Non-
•
Compliance
Device
PCH-FW Configuration
This page displays the information of the connected M.2 devices.
System parameters
ME State
The following options show only when "ME State" = Enabled.
Firmware Update
Configuration
Me FW Image Re-
•
Flash
• FW Update
SIMATIC IPC RW-543A
Operating Instructions, 03/2023, A5E52332059-AA
Function description
Configure PCI Speed.
Detect Non-Compliance PCI Express Device in PCI1&PCI2
SLOTS.
Control the MiniPCIE.
Configure PCIe Speed.
Detect Non-Compliance PCI Express Device in MiniPCIE.
Function description
The state of management engine(ME).
Configure Management Engine Technology Parameters.
Enable or disable Me FW Image Re-Flash function.
Enable or disable Me FW update function.
BIOS description
11.3 Advanced menu
Configuration Default setting
options
[Auto]
• [Auto]
• [Gen1]
• [Gen2]
• [Gen3]
[Disabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
[Auto]
• [Auto]
• [Gen1]
• [Gen2]
• [Gen3]
[Disabled]
• [Enabled]
• [Disabled]
Configuration Default setting
options
[Enabled]
• [Enabled]
• [Disabled]
[Disabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
101