Table of Contents
Advertisement
The following figure shows the position of the on/off button at the front of the device.
1
NOTICE
Data loss
If the device is restarted by hardware reset, data in the main memory is deleted and the data
on the hard disk drive may be lost.
Perform a hardware reset only in the case of an emergency. Close all running programs.
Make sure that there is no more read or write access to drives and I/O before performing the
hardware reset.
SIMATIC IPC RW-543A
Operating Instructions, 03/2023, A5E52332059-AA
You can set this operation as shut down or hibernate in operating system.
1.4 External design of the device
The on/off button ① has three functions:
• Switch on the PC, press the on/off button once
shortly.
• Shut down the operating system and switch off
PC, press the on/off button once shortly.
• Switch off PC without shutting down the
operating system, press for more than 4 seconds
– hardware reset.
Product description
1
17
Advertisement
Table of Contents
