Table of Contents
Advertisement
Device maintenance and repair
7.4 Installing operating system, software and drivers
Drivers list
The following drivers need to be installed on your device:
Operating system
Windows 10
Procedure
1. Insert the provided USB stick into the device.
2. Start the "Documentation and Drivers" suite from the USB flash drive by executing the
"START_DocuAndDrivers.CMD" file.
3. Install the desired software and drivers.
4. Follow the below steps and click the icon
Note
For a new installation of Windows operating systems, the chipset driver must be installed
before all other drivers, if required.
Step 1: install the chipset driver
1. Click Step 1: Intel(R) Chipset Device Software.
2. Click
3. Click Next to continue.
4. Click Accept to accept the license agreement.
5. Click Install to allow the computer to start the installation.
The installation starts.
6. Click Finish.
The chipset installation is completed.
Step 2: install the Management Engine driver
1. Click Step 2: Install: Intel(R) Management Engine.
2. Click
3. Click Yes to confirm the user account control question.
4. Click Next to continue.
72
Drivers needed
•
Step 1: Intel(R) Chipset Device Software
•
Step 2: Intel(R) Management Engine
•
Step 3: Intel(R) Network Connections Software
•
Step 4: Intel(R) UHD Graphics Driver
•
Step 5: Realtek High Definition Audio Driver
to install the chipset driver.
to install the Management Engine driver.
to install the required driver.
Operating Instructions, 03/2023, A5E52332059-AA
SIMATIC IPC RW-543A
Advertisement
Table of Contents
