Siemens SIMATIC IPC RW-543A Operating Instructions Manual page 103

System parameters Function description
COM5 Enable or disable the serial port (COM) 5.
• Serial Port
COM6
Enable or disable the serial port (COM) 6.
Serial Port
•
USB Configuration
In the USB Configuration page, you can change the USB related features.
System Function description
parameters
USB Port Enable or disable the USB ports individually.
Per-Port
Control
Legacy USB Enable or disable the Legacy USB Support.
Support
• [Enabled]: Enables the support for USB devices on legacy
operating systems (OS).
• [Disabled]: The USB devices can be used only for EFI applications.
• [Auto]: The system detects the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If
no USB device is detected, the legacy USB support is disabled.
XHCI Hand- Enable or disable the XHCI Hand-off.
off
The following options show only when "USB Port Per-Port Control = [Select Per-Pin]".
USB X60 Enable or disable the USB X60.
USB X61 Enable or disable the USB X61.
USB X62 Enable or disable the USB X62.
USB X63
Enable or disable the USB X63.
USB X64 Enable or disable the USB X64.
USB X65 Enable or disable the USB X65.
Internal Enable or disable the Internal USB2_1.
USB2_1
SIMATIC IPC RW-543A
Operating Instructions, 03/2023, A5E52332059-AA
BIOS description
11.3 Advanced menu
Configuration Default setting
options
[Enabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
Configuration Default setting
options
[Select Per-Pin]
• [Select Per-Pin]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
• [Auto]
[Disabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
[Enabled]
• [Enabled]
• [Disabled]
103