Table of Contents
Advertisement
Replaceable Parts
Assembly and Disassembly Guidelines
Replacing the Rear Panel Recorder Output(s) Cable
Assembly
Note
5-22
1.
Disassemble the power meter down to allow access to the rear panel
connectors. (Refer to "Removing the A4 Comms Assembly", on page 5-11).
2.
Replace the recorder output cable assembly using the replacement kit and
the torque indicated on the following diagram.
Recorder output A connects to A4 J23 and recorder output B connects to A4
J24.
25 lb/in
Agilent E4418B/E4419B Service Guide
Advertisement
Table of Contents
