Agilent 4339B High Resistance Meter Operation Manual Manual Change Agilent Part No. N/A Oct 2012 Change 1 Add: Measurement Uncertainties (MU) on Chapter 9 Maintenance Performance Tests (Page 9-3). Measurement Uncertainties Measurement Uncertainties (MU) values shown on manual are for reference only. Always refer to test report for the latest MU values.
Page 12
Agilent 4339B High Resistance Meter Operation Manual Manual Change Agilent Part No. N/A Jun 2009 Change 1 Add TAR and change the Measurement Uncertainty value of Source Voltage Accuracy Test (Page 9-19) to the following. Source Test Limits Test Result...
Page 13
100 V Long ±0.0453 x x 10 ± 0.0035 × 10 12.8 100 V Short ±0.0550 x x 10 ± 0.0035 × 10 15.6 10 V Long ±0.0546 x x 10 ± 0.0035 × 10 15.5 Copyright 2008 Agilent Technologies...
Page 14
(Grounded Device) (Page 9-20) to the following. Resistor Voltage Test Limits Test Result Measurement Setting Setting Uncertainty 100 V ±0.0066 x 10 x 10 ± 0.0003 × 10 22.6 10 V ±0.0573 x 10 x 10 ± 0.0035 × 10 16.2 Copyright 2008 Agilent Technologies...
Page 15
Agilent 4339B High Resistance Meter Operation Manual Manual Change Agilent Part No. N/A Sep 2008 Change 1 Change the Measurement Uncertainty value of Source Voltage Accuracy Test (Page 9-19) to the following. Source Test Limits Test Result Measurement Voltage Uncertainty Setting ±0.10 V...
Page 16
(Page 9-20) to the following. Resistor Voltage Test Limits Test Result Measurement Setting Setting Uncertainty 100 V ±0.0065 x 10 x 10 ± 0.0003 × 10 10 V ±0.0573 x 10 x 10 ± 0.0035 × 10 Copyright 2008 Agilent Technologies...
Page 17
Agilent Part No. N/A June 2007 Change 1 Add the following note to the “3-c. Turning ON the 4339B” (page 1-13). Note In case the setting of the ac line frequency is not match, there’s any possibility the measurement error will rise.
Page 19
Hewlett-Packard’s former test and measurement, semiconductor products and chemical analysis businesses are now part of Agilent Technologies. To reduce potential confusion, the only change to product numbers and names has been in the company name prefix: where a product number/name was HP XXXX the current name/number is now Agilent XXXX.
When you notice any of the unusual conditions listed below, immediately terminate operation and disconnect the power cable. Contact your local Agilent Technologies sales representative or authorized service company for repair of the instrument. If you continue to operate without repairing the instrument, there is a potential fire or shock hazard for the operator.
Page 36
j j g j j g j j g j j g j j g j j g j j g j j g j j g j j g f j j g f j g j j g f j j j j j g j j g j j g...
Page 228
Performance Characteristics 4339B upplemental Performance Characteristics he supplemental performance characteristics are listed below. hese characteristics are not specications but are typical characteristics included as additional information for the operator. ypical Measurement Accuracy ange esistance Measurement Current Measurement ( % of eadings)
The 4339B requires periodic performance tests. The frequency of performance testing depends on the operating and environmental conditions under which the 4339B is used. Verify the 4339B's performance at least once a year, using the performance tests described in this section. aintenance 9-3...
Page 287
For more information about Agilent Technologies test and measurement products, applications, services, and for a current sales office listing, visit our web site: http://www.agilent.com/find/tmdir. You can also contact one of the following centers and ask for a test and measurement sales representative.