Table of Contents
Advertisement
▶ Install the node link bar.
Align the guide pins of the node link bar (see circle).
Figure 21: Installing the node link bar
▶ Fasten the node link bar with one screw on each side (see circles).
▶ Install the riser modules, see
4.7
Installing the CX2550 M6 or CX2560 M6
server node
CAUTION
▶
Follow the safety instructions in
"Installing a riser module" on page
Upgrade and Maintenance Manual
Basic hardware procedures
"Important information" on page
51.
27.
57
Advertisement
Table of Contents
