Table of Contents
Advertisement
Installing a memory module
Figure 98: Opening the securing clips
▶ Press the securing clips on both sides of the memory slot concerned
outward.
▶ If applicable, remove the dummy module.
Figure 99: Installing a memory module
▶ Align the notch on the bottom of the module with the crossbar in the slot.
▶ Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.
Figure 100: Correct position of securing clips
To improve the contact of the memory module perform the following
steps:
Upgrade and Maintenance Manual
Main memory
165
Advertisement
Table of Contents
