Table of Contents
Advertisement
System board and components
Concluding steps
▶ Install all memory modules, see
Ensure that you install each memory module again in the slot it was
located before the replacement.
CAUTION
In case of Optane PMem modules are not reinstalled in the right
slots, data can be lost!
▶ If applicable,
"Installing the memory slot air ducts for air cooling" on page
▶ If applicable,
"Installing the memory slot air ducts for liquid cooling (only
CX2550 M6)" on page
▶
"Installing a riser module" on page
▶
"Installing the CX2550 M6 or CX2560 M6 server node" on page
▶ If applicable, reconnect all external cables.
▶
"Switching on the server node" on page
▶
"Enabling the boot watchdog" on page
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
● Restart your server.
● As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
● If a password is assigned, enter the password and press [Enter].
● Select the Exit menu.
● Select Commit settings and Exit.
● Verify that the Global Error indicator stops flashing.
262
"Installing memory modules" on page
56.
51.
73.
Upgrade and Maintenance Manual
59.
163.
54.
57.
Advertisement
Table of Contents
