Fujitsu PRIMERGY CX2550 M6 Upgrade And Maintenance Manual page 106

Expansion cards and OCP mezzanine cards
The SFP+ transceiver modules are hot-pluggable. The activation replacement
depends on the system configuration. Check it with the customer who is
managing the system or the system engineer.
Installing SFP+ transceiver modules
Figure 39: Removing the protective cap
▶ Remove the SFP+ transceiver module from its protective packaging.
▶ Remove the protective cap from the new/additional SFP+ transceiver
module.
CAUTION
▶
Always keep the protective caps attached to the SFP+
transceiver modules and fiber-optic cable connectors until you
are ready to make a connection.
▶
Keep the protective cap for future use.
106 Upgrade and Maintenance Manual