Fujitsu PRIMERGY CX2550 M6 Upgrade And Maintenance Manual page 271

Figure 189: Cabling overview of the CX2550 M6 (liquid cooling)
Figure 190: Cabling of the CX2550 M6 (liquid cooling) (A)
▶ Connect the SATA cable to the HDD connector on the system board (1).
▶ Place the SATA cable into the gap between the system board connector and
the tubes of the LC kit.
▶ If applicable, insert a green holder clip on the tube of the LC kit with the
aligning mark (2).
▶ Place the SATA cable into the green holder clip.
Upgrade and Maintenance Manual
Cabling
271