Fujitsu PRIMERGY CX2550 M6 Upgrade And Maintenance Manual page 228

System board and components
▶ Remove all external cables from the server node.
▶
"Removing server nodes from the server enclosure" on page
▶
"Removing a riser module" on page
▶ If applicable,
"Removing the memory slot air ducts for air cooling" on
page 53.
▶ If applicable,
"Removing the memory slot air ducts for liquid cooling (only
CX2550 M6)" on page
▶ If applicable, remove the expansion cards from slot 3 to slot 9, see
"Removing expansion cards " on page
▶ If applicable, remove the OCP module, see
on page 101.
▶ Remove the bottom system board, see
board" on page
Removing BitLocker protection and decrypting the volume
▶ Before removing the TPM board, it is necessary to remove BitLocker
protection from the computer and to decrypt the volume. Ask the system
administrator to turn off BitLocker protection using the BitLocker setup
wizard available either from the Control Panel or Windows Explorer:
▶ Open Bitlocker Drive Encryption by clicking the Start button, clicking
Control Panel, clicking Security, and then clicking Bitlocker Drive
Encryption.
Administrator permission required: If you are prompted for an
administrator password or confirmation, type the password or
provide confirmation.
▶ To turn off BitLocker and decrypt the volume, click Turn Off BitLocker,
and then click Decrypt the volume.
Decrypting the volume may be time-consuming. By decrypting the
volume, all of the information stored on that computer is decrypted.
For more information on how to disable BitLocker drive encryption,
see the Microsoft Knowledge Base. See the Fujitsu web pages for
more details.
228
54.
259.
Upgrade and Maintenance Manual
49.
118.
"Removing the OCP module"
"Removing the defective system
45.