Tools:
Phillips PH2 / (+) No. 2 screw driver (for cover 2)
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server node" on page
▶ Remove all external cables from the server node.
▶
"Removing server nodes from the server enclosure" on page
▶
"Removing a riser module" on page
Replacing the Dual microSD 64GB Enterprise
▶ Remove the defective Dual microSD 64GB Enterprise, see
Dual microSD 64GB Enterprise" on page
▶ Remove both microSD cards from the defective Dual microSD 64GB
Enterprise.
Proceed as described in the following:
Figure 174: Removing the microSD card
▶ To eject the microSD card, gently push it in and then let go (1).
▶ Pull the microSD card straight out of its slot (2).
49.
Upgrade and Maintenance Manual
System board and components
41.
45.
251.
45.
"Removing the
253