Control panel
Turn the controls panel I, as shown in figure Fig.
9.7, to access in an optimal manner the compo-
nents inside the boiler.
Fig. 9.7
Reassembly the external panels
9.4
Side panels
Fit the external panels E and G in the reverse
order to that described on section "Dismantling
the external panels" to page 75.
Front panel
• Fit the front panel D, hooking it on the upper
side.
• Push the spring towards the internal side of the
boiler and simultaneously push the front case
panel D until it is completely hold in place (Fig.
9.8) step 1-2.
• Repeat the same operation on the opposite
side of the front panel D, (Fig. 9.8) step 3-4.
• Ensure that the front panel edge is close-fitting
to the side panels.
• Lock in place the panel D with the appropriate
screws A (Fig. 9.6.
- 76 -
MAINTENANCE
G
I
Fig. 9.8
9.5
• Close the c.h. isolating valves (3 and 5 in Fig.
9.9).
3
Fig. 9.9
E
Emptying the c.h. system
Close
position
D
5