Table of Contents
Advertisement
Fig. 7.27
• By pressing key 12 (Fig. 7.24) confirmation
of the inserted value is obtained.
• Press keys 15 or 16 (Fig. 7.24) to exit with-
out changing the value.
• Exiting the "programming mode" is auto-
matic, after 15 minutes, or by cutting power.
Programming using the REMOTE control
• Press button
for more than 3 seconds to
mode (Fig. 7.28).
enter in
0
21
3
1
8
6
1 5
9
1
2
Fig. 7.28
• Press buttons
and
time to enter transparent programming (Fig.
7.29).
- 66 -
COMMISSIONING
Fig. 7.29
• Press buttons
"PM11" program of the pump post-circula-
tion (Fig. 7.30).
Fig. 7.30
• To modify the programmed SET, act on
buttons
grammed number to flash (Fig. 7.31). Each
step increased or decreased corresponds to
1 second.
at the same
Fig. 7.31
• To exit programming, press button .
or
to display the
and wait for the pro-
or
Advertisement
Table of Contents
