7.18 Setting Record - Biasi Inovia 16S User Manual

keys 12 - 15 - 16 (Fig. 7.43) for 10 seconds
at the same time until the letters P01 are
displayed on the LCD display, indicating that
"parameter 01" (Fig. 7.42) has been acti-
vated.
Fig. 7.42
9
10
11
12 13
Fig. 7.43
• Scroll the various parameters using keys 15
or 16 until the letters P12 are displayed on
the LCD display and the value of the param-
eter (100=Inovia 16S and Inovia 25S), indi-
cating that "parameter 12" (Fig. 7.44) has
been activated.
Fig. 7.44
• It is possible to modify parameter using keys
9 or 10 (Fig. 7.43) (Refer to Fig. 7.41 and
determine the correct Value appertaining to
the output required for the central heating
requirement.).
- 70 -
COMMISSIONING
• By pressing key 12 (Fig. 7.43) confirmation
of the inserted value is obtained.
• Press keys 15 or 16 (Fig. 7.43) to exit with-
out changing the value.
• Exiting the "programming mode" is auto-
matic, after 15 minutes, or by cutting power.

7.18 Setting record

Important: at the end of the setting opera-
17
tion it is important to fill/update the table
(Fig. 7.45).
16
This to allow a correct setting of this boiler
in case of replacement of the main control
p.c.b.
15
14
PARAMETER
Boiler type
Water sensors con-
figuration
Pump management
TA/OT zone manage-
ment
Gas type
Not used
C.h. flow max tem-
perature °C
Factory
reset
Chimney
function
C.h. reignition fre-
quency
C.h. pump post-circu-
lation
Max. useful output in
c.h. mode
C.h. pump working
type
DIGIT
P 01
P 02
P 03
P 04
P 05
P 06
P 07
parameters
P 08
sweep
P 09
P 10
P 11
P 12
P 13
VALUES
---------------