I
Fig. 10.3
10.3 Reassembly the external
panels
Side panels
Fit the external panels "E" and "G" in the
reverse order to that described on section
"Dismantling the external panels" on page
76.
Front panel
• Fit the front panel "D", hooking it on the
upper side.
• Push the case panel "D" down and in until
completely held in place (Fig. 10.4) step
1-2.
• Repeat the same operation on the oppo-
site side of the front panel "D", (Fig. 10.4)
step 3-4.
• Ensure that the front panel edge is close-
fitting to the side panels.
• Lock in place the panel "D" with the ap-
propriate screws "A" (Fig. 10.1).
MAINTENANCE
G
Fig. 10.4
10.4 Emptying the D.H.W. system
• Turn off the D.C.W. .inlet isolating valve 8
(Fig. 10.5).
5
Fig. 10.5
• Turn on the hot water taps and any drain
cocks.
E
D
8
Close
position
9
- 77 -