Dismantling The External Panels - Biasi Inovia 16S User Manual

Fig. 9.4
• By pressing key 12 (Fig. 9.1) confirmation of
the inserted value is obtained.
• Press keys 15 or 16 to exit without changing
the value.
• Exiting the "programming mode" is automatic,
after 15 minutes, or by cutting power.
After maintenance, if the value is left on 0 the
maintenance symbols will not disappear but in-
stead continue to flash, as they did prior to main-
tenance.
The remaining months until maintenance will be
replicated in read only in the 'info' section under
value J15.
N.B.: the flashing symbol in Fig. 9.5 is not an er-
ror. The boiler continues to run normally but it
indicates the expiry of the maintenance period.
Fig. 9.5

Dismantling the external panels

9.3
Front panel
• Unscrew screws A and remove the front panel
D by pulling it and pushing it towards the top so
MAINTENANCE
that it is freed from the top housings (Fig. 9.6).
Side panels
Loosen screws "B - F" and "C - H" in Fig. 9.6 and
remove the two side panels E and G by pulling
towards the outside.
B
F
G
Fig. 9.6
A
C
E
H
D
- 75 -