Table of Contents
Advertisement
NFC interface board (models without a card reader)
Table 6-6
NFC interface board description and part number
Description
NFC interface board
Card reader insert (for use in models without a card reader; available in the Plastics Kit, spare part number L56454-001)
Before removing the NFC interface board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the NFC interface board:
1.
Disconnect the NFC board cable from the NFC interface board (1).
2.
Disconnect the touchpad cable from the NFC interface board (2).
3.
Disconnect the NFC interface board cable from the system board (3).
4.
Remove the NFC interface board from the computer (4).
Reverse this procedure to install the NFC interface board.
44
Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page
30).
37).
28).
Spare part number
L59058-001
Advertisement
Table of Contents
