Table of Contents
Advertisement
Display assembly
Table 6-1
Display assembly descriptions and part numbers
Description
13.3-in., FHD, BrightView, UWVA, 1000 nits touchscreen display assembly equipped with privacy filter,
webcam/microphone module, and WLAN antenna
13.3-in., FHD, UWVA, 400 nits, touchscreen display assembly equipped with webcam/microphone module
and WLAN antenna
Before removing the display assembly, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Disconnect the battery (see
Remove the display assembly:
1.
Disconnect the webcam cable from the system board (1), and then remove the cable from the clip (2).
2.
Disconnect the WLAN antenna cables (3) from the WLAN module.
3.
Disconnect the display cable from the system board (4), and then remove the cable from the clips (5).
4.
Open the display to open the hinges (1).
5.
Remove the seven Phillips M2.5 × 5.0 screws (2) that secure the display hinges to the computer.
38
Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page
30).
37).
28).
Spare part number
L56440-001
L56436-001
Advertisement
Table of Contents
