Nfc Interface Board (Models Without A Card Reader) - HP EliteBook x360 830 G5 Maintenance And Service Manual

NFC interface board (models without a card reader)

Table 6-6 NFC interface board description and part number
Description
NFC interface board
Card reader insert (for use in models without a card reader; available in the Plastics Kit)
Before removing the NFC interface board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the NFC interface board:
1. Disconnect the NFC board cable from the NFC interface board (1).
2. Disconnect the TouchPad cable from the NFC interface board (2).
3. Disconnect the NFC interface board cable from the system board (3).
4. Remove the NFC interface board from the computer (4).
Reverse this procedure to install the NFC interface board.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 33).
42).
31).
Component replacement procedures
Spare part number
L59058-001
L56454-001 (Plastics Kit)
49