Wlan Module - HP ZHAN X 13 G2 Maintenance And Service Manual

WLAN module

Table 5-3 WLAN module descriptions and part number
Description
Intel 9560 ac 2×2 + Bluetooth 5 MU-MIMO M.2 2230 non-vPro 160-MHz MIPI + BRI WW WLAN module
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module
authorized for use in the computer by the governmental agency that regulates wireless devices in your country
or region. If you replace the module and then receive a warning message, remove the module to restore device
functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
antenna cable connects to the WLAN module #1/Main terminal. The #2/black WLAN antenna cable
connects to the WLAN module #1/Aux terminal.
2. Remove the Phillips M2.0 × 2.5 screw (2) that secures the WLAN module to the bottom cover. (The WLAN
module tilts up.)
Bottom cover on page
Battery on page
Models have either one or two WLAN antennas. On models with two antennas, the #1/white WLAN
(Preparation for disassembly on page
28).
30).
Spare part number
L22634-005
27).
Component replacement procedures 31