1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. ENVY
  6. Maintenance and service manual

HP ENVY Maintenance And Service Manual

Hide thumbs Also See for ENVY:
Table of Contents

Advertisement

Quick Links

See also: Maintenance and Service Manual
HP ENVY Notebook PC (model numbers 13-
d000 through 13-d099 and 13-d100
through 13-d199)
Maintenance and Service Guide

Advertisement

Table of Contents
loading

Related Manuals for HP ENVY

Summary of Contents for HP ENVY

  • Page 1 HP ENVY Notebook PC (model numbers 13- d000 through 13-d099 and 13-d100 through 13-d199) Maintenance and Service Guide...
  • Page 2 © Copyright 2016 HP Development Company, L.P. Product notice Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Intel and Core are U.S. registered trademarks of Intel Corporation. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
  • Page 3 Important Notice about Customer Self-Repair Parts CAUTION: Your computer includes Customer Self-Repair parts and parts that should only be accessed by an authorized service provider. See Chapter 5, "Removal and replacement procedures for Customer Self-Repair parts," for details. Accessing parts described in Chapter 6, "Removal and replacement procedures for Authorized Service Provider only parts,"...
  • Page 4 Important Notice about Customer Self-Repair Parts...
  • Page 5 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 6 Safety warning notice...

  • Page 7: Table Of Contents

    Table of contents 1 Product description ............................1 2 External component identification ........................3 Locating hardware ..............................3 Locating software ..............................3 Display ..................................4 Buttons, speakers, and fingerprint reader ......................5 Keys ..................................6 Lights ..................................7 TouchPad ................................8 Left side .................................
  • Page 8 Downloading a BIOS update ......................56 Synchronizing a tablet and keyboard (select products only) ................57 7 Using HP PC Hardware Diagnostics (UEFI) ....................... 58 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ..............58 8 Specifications .............................. 60 Computer specifications ............................60 9 Backing up, restoring, and recovering ......................
  • Page 9 Requirements for specific countries and regions ....................67 11 Recycling ..............................69 Index ................................70...

  • Page 11: Product Description

    ● 128-MB, M2.2280, SATA-3 Audio and video HP TrueVision HD webcam: fixed (no tilt) with activity light, 1280×720 by 30 frames per second Integrated dual-array digital microphones with appropriate beam-forming, echo-cancellation, noise-reduction software Bang & Olufsen dual speakers (2) with subwoofer...
  • Page 12 Support for modern TrackPad gestures ● Taps enables as default Power requirements Support for 65-W HP Smart AC adapter (non-PFC, EM, 3-wire, 4.5-mm) and 45-W HP Smart AC adapter (non-PFC, RC, 3-wire, 4.5-mm) 1.0-meter (3.2-feet) power cord Support for 6-cell, 44-Wh, 1.98-Ah, Li-ion battery...

  • Page 13: External Component Identification

    External component identification Locating hardware To find out what hardware is installed on your computer: ▲ Type device manager in the taskbar search box, and then select the Device Manager app. A list displays all the devices installed on your computer. For information about system hardware components and the system BIOS version number, press fn+esc (select products only).

  • Page 14: Display

    To see wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this guide, select the Start button, select All apps, select HP Help and Support, and then select HP Documentation. Chapter 2 External component identification...

  • Page 15: Buttons, Speakers, And Fingerprint Reader

    Buttons, speakers, and fingerprint reader NOTE: Your computer may look slightly different from the illustration in this section. Item Component Description Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep.

  • Page 16: Keys

    Item Component Description Speakers Produce sound. Fingerprint reader Allows a fingerprint logon to Windows, instead of a password logon. Keys NOTE: Your computer may look slightly different from the illustration in this section. Item Component Description Displays system information when pressed in combination with the key.

  • Page 17: Lights

    Lights NOTE: Your computer may look slightly different from the illustration in this section. Item Component Description Power light ● On: The computer is on. ● Blinking: The computer is in the Sleep state, a power- saving state. The computer shuts off power to the display and other unneeded components.

  • Page 18: Touchpad

    TouchPad NOTE: Your computer may look slightly different from the illustration in this section. Item Component Description TouchPad zone Reads finger gestures to move the pointer or activate items on the screen Left TouchPad button Functions like the left button on an external mouse. Right TouchPad button Functions like the right button on an external mouse.

  • Page 19: Left Side

    For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this guide, select the Start button, select All apps, select HP Help and Support, and then select HP Documentation. Left side...

  • Page 20: Right Side

    Right side Item Component Description Power light On: The computer is on. ● ● Blinking: The computer is in the Sleep state, a power- saving state. The computer shuts off power to the display and other unneeded components. ● The computer is off or in Hibernation. Hibernation is a power-saving state that uses the least amount of power.

  • Page 21: Bottom

    Bottom NOTE: Your computer may look slightly different from the illustration in this section. Component Description Vents (2) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.

  • Page 22: Illustrated Parts Catalog

    Illustrated parts catalog Service tag When ordering parts or requesting information, provide the computer serial number and model number provided on the service tag. Item Description Function Product name This is the product name affixed to the front of the computer. Serial number (s/n) This is an alphanumeric identifier that is unique to each product.
  • Page 23 Item Description Function Warranty period This number describes the duration of the warranty period for the computer. Model description This is the alphanumeric identifier used to locate documents, drivers, and support for the computer. Service tag...

  • Page 24: Computer Major Components

    Computer major components Chapter 3 Illustrated parts catalog...
  • Page 25 Item Component Spare part number Display assembly: The display assembly is spared at the subcomponent level only. For more display assembly spare part information, see Display assembly subcomponents on page Keyboard/top cover (in natural silver finish; includes backlight, backlight cable, and keyboard cable): For use in Belgium 829305-A41 For use in Canada...
  • Page 26 Item Component Spare part number Intel Dual Band Wireless-AC 7265 802.11 ac 2×2 WiFi + Bluetooth 4.0 Combo Adapter 793840-005 Solid-state drive/WLAN module bracket (included in the Solid-state drive Hardware Kit, spare part number 829300-001) TouchPad board 833590-001 NOTE: The TouchPad board spare part kit does not include the TouchPad board bracket or the TouchPad board cable.
  • Page 27 Item Component Spare part number Equipped with an Intel Core i3-6100U 2.30-GHz processor (1600-MHz FSB, 3.0-MB L3 829283-001 cache, dual core, 15-W [dynamic PL1 to 8.5-W]), 4.0-GB of system memory and a non- Windows operating system (18) Heat sink (includes replacement thermal material) 829314-001 (19) 3-cell, 45-Wh, 3.83-Ah, Li-ion battery (includes cable)

  • Page 28: Display Assembly Subcomponents

    Display assembly subcomponents Item Component Spare part number Display bezel 833480-001 and 857386-001 Display bezel screw covers (2) For use only on computers with model numbers 13-d100 through 13-d199 848174-001 For use only on computers with model numbers 13-d000 through 13-d099 833481-001 Webcam/microphone module (includes two microphone rubber isolators and double-sided adhesive) For use only on computers with model numbers 13-d100 through 13-d199...
  • Page 29 Item Component Spare part number 13.3-in, RGBW QHD+, WLED, BrightView (3200×1800), ultraslim-flat (2.6-mm), UWVA 848177-001 display panel for use only on computers with model numbers 13-d100 through 13-d199 13.3-in, RGBW QHD+, WLED, BrightView (3200×1800), ultraslim-flat (2.6-mm), UWVA 815165-001 display panel for use only on computers with model numbers 13-d000 through 13-d099 13.3-in, FHD, WLED, AntiGlare (1920×1080), ultraslim-flat (2.6-mm), UWVA display panel 848178-001 for use only on computers with model numbers 13-d100 through 13-d199...

  • Page 30: Miscellaneous Parts

    Miscellaneous parts Component Spare part number AC adapter: 65-W, HP Smart, AC adapter (non-PFC, EM, 3-wire, 4.5-mm) 714635-850 45-W, HP Smart, AC adapter (non-PFC, RC, 3-wire, 4.5-mm) 741553-850 HP USB external DVD-RW Drive 747080-011 HP HDMI-to-VGA adapter 701943-011 HP RJ45-to-USB adapter dongle 539614-011 Power cord (3-pin, black, 1.00-m):...

  • Page 31: Removal And Replacement Procedures Preliminary Requirements

    Removal and replacement procedures preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: Case utility tool or similar plastic, flat-tipped tool ● ● Flat-bladed screwdriver Magnetic screwdriver ● ● Phillips P0 and P1 screwdrivers Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.

  • Page 32: Cables And Connectors

    Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion.

  • Page 33: Grounding Guidelines

    Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions. A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or microcircuitry.

  • Page 34: Packaging And Transporting Guidelines

    Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● ● Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.

  • Page 35: Equipment Guidelines

    Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a ● minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times.

  • Page 36: Removal And Replacement Procedures

    Removal and replacement procedures CAUTION: Components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the computer or void the warranty. Component replacement procedures NOTE: Details about the computer, including model, serial number, product key, and length of warranty, are on the service tag one the bottom of the computer.
  • Page 37 Remove the eight Phillips PM2.5×5.5 screws (2) that secure the bottom cover to the computer. Remove the three Phillips PM2.5×3.4 screws that secure the bottom cover to the computer. Insert a case utility tool (1) or similar plastic, flat-tipped tool between the front edge of the bottom cover and keyboard/top cover.

  • Page 38: Battery

    Remove the four Phillips PM2.0×2.3 screws (1) that secure the bottom cover retention brackets to the bottom cover. Remove the bottom cover retention brackets (2). Reverse this procedure to install the bottom cover. Battery Description Spare part number 3-cell, 45-Wh, 3.83-Ah, Li-ion battery 816238-850 Before removing the battery, follow these steps: Turn off the computer.

  • Page 39: Solid-State Drive

    Remove the battery (4). Reverse this procedure to install the battery. Solid-state drive Description Spare part number 512-MB, M2, SATA-3, supporting TLC 814224-001 256-MB, M2, SATA-3, supporting TLC 812708-001 128-MB, M2, SATA-3, supporting TLC 820547-001 128-MB, M2.2280, SATA-3 829985-001 Solid-state Drive Hardware Kit 829300-001 Before removing the solid-state drive, follow these steps: Turn off the computer.
  • Page 40 Remove the Phillips PM2.0×2.6 broad head screw (1) that secures the solid-state drive/WLAN module bracket to the keyboard/top cover. Remove the solid-state drive/WLAN module bracket (2). The solid-state drive/WLAN module bracket is included in the Solid-state Drive Hardware Kit, spare part number 829300-001.

  • Page 41: Wlan Module

    WLAN module Description Spare part number Intel Dual Band Wireless-AC 7265 802.11 ac 2×2 WiFi + Bluetooth 4.0 Combo Adapter 793840-005 Broadcom BCM943142 802.11 bgn 1×1 Wi-Fi + Bluetooth 4.0 M.2 Combo Adapter 792608-005 CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region.
  • Page 42 Disconnect the WLAN antenna cables (3) from the WLAN module terminals. NOTE: The WLAN antenna cable labeled “1/MAIN” connects to the WLAN module “Main” terminal. The WLAN antenna cable labeled “2/AUX” connects to the WLAN module “Aux” terminal. Remove the WLAN module (4). NOTE: If the WLAN antennas are not connected to the WLAN module, the protective sleeve should be installed on the antenna connectors, as shown in the following illustration.

  • Page 43: Speakers

    Speakers Description Spare part number Speaker Kit (includes left and right speakers and cables) 829309-001 Before removing the speakers, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer.

  • Page 44: Fingerprint Reader Board

    Fingerprint reader board Description Spare part number Fingerprint reader board 836257-001 NOTE: The fingerprint board spare part kit does not include the fingerprint reader board bracket or the fingerprint reader board cable. The fingerprint reader board bracket is available using spare part number 829302-001.

  • Page 45: Touchpad Board

    Remove the fingerprint reader board (5). Reverse this procedure to install the fingerprint reader board. TouchPad board Description Spare part number TouchPad board 833590-001 NOTE: The TouchPad board spare part kit does not include the TouchPad board bracket or the TouchPad board cable.

  • Page 46: Power Connector Cable

    Remove the TouchPad board (4). Reverse this procedure to install the TouchPad board. Power connector cable Description Spare part number Power connector cable 838841-001 Before removing the power connector cable, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 47: Fan

    Remove the power connector cable (5). Reverse this procedure to install the power connector cable. Description Spare part number Fans (2, include cable) 829296-001 Before removing the fans, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 48: Security Cable Slot Bracket

    Remove the fans (5). Remove the fans. Reverse this procedure to install the fans. Security cable slot bracket Description Spare part number Security cable slot bracket 829298-001 Before removing the security cable slot bracket, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 49: System Board

    Remove the security cable slot bracket (2). Reverse this procedure to install the security cable slot bracket. System board Description Spare part number Equipped with an Intel Core i7-6500U 2.50-GHz (SC turbo up to 3.10-GHz) processor (1600-MHz FSB, 829286-601 4.0-MB L3 cache, dual core, 15-W [dynamic PL1 to 8.5-W]), 8.0-GB of system memory, and the Windows 10 Professional operating system Equipped with an Intel Core i7-6500U 2.50-GHz (SC turbo up to 3.10-GHz) processor (1600-MHz FSB, 829286-001...
  • Page 50 Before removing the system board, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer. Disconnect all external devices from the computer.
  • Page 51 Release the ZIF connector (1) to which the TouchPad board cable is attached, and then disconnect the TouchPad board cable from the system board. Release the ZIF connector (2) to which the keyboard backlight cable is attached, and then disconnect the keyboard backlight board cable from the system board.
  • Page 52 Remove the left I/O bracket (3). The left I/O bracket is available using spare part number 829299-001. Lift the left side of the system board (1) until it rests at an angle. Slide the system board (2) up and to the left at an angle until the connectors on the right side of the system board are clear of the openings on the right side of the keyboard/top cover.

  • Page 53: Heat Sink

    Disconnect the RTC battery cable (4) from the system board. Remove the system board. Reverse this procedure to install the system board. Heat sink Description Spare part number Heat sink (includes replacement thermal material) 829314-001 Before removing the heat sink, follow these steps: Turn off the computer.
  • Page 54 Fans (see Fan on page System board (see System board on page Remove the heat sink: Following the 1, 2, 3 sequence stamped into the heat sink, remove the three Phillips PM2.0×2.4 screws (1) that secure the heat sink to the system board. Remove the heat sink (2).

  • Page 55: Rtc Battery

    Reverse this procedure to install the heat sink. RTC battery Description Spare part number RTC battery (includes cable and double-sided adhesive) 829306-001 Before removing the RTC battery, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 56: Display Assembly

    Reverse this procedure to install the RTC battery. Display assembly NOTE: The display assembly is spared at the subcomponent level only. For more display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: Turn off the computer.
  • Page 57 Remove the two Phillips PM2.5×2.9 broad head screws (2) that secure the display assembly to the keyboard/top cover. Swing the display hinges (1) up and back as far as they will go. Slide the keyboard/top cover (2) away from the display assembly. If it is necessary to replace the display bezel or any of the display assembly subcomponents: Remove the two display bezel screw covers (1).
  • Page 58 Remove the two Phillips PM2.5×3.4 screws (2) that secure the display bezel to the display assembly. CAUTION: When releasing the bottom edge of the display bezel, make note of the location and the strength of the adhesive strip (1) on the of the bezel. This adhesive strip is important to the fit of the display bezel.
  • Page 59 Remove the four Phillips PM2.0×2.3 screws that secure the display panel to the display back cover. CAUTION: Before turning the display panel upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel.
  • Page 60 848177-001 – 13.3-in, RGBW QHD+, WLED, BrightView (3200×1800), ultraslim-flat (2.6-mm), ● UWVA display panel for use only on computers with model numbers 13-d100 through 13- d199 ● 815165-001 – 13.3-in, RGBW QHD+, WLED, BrightView (3200×1800), ultraslim-flat (2.6-mm), UWVA display panel for use only on model numbers 13-d000 through 13-d099 ●...
  • Page 61 Remove the display bezel. Remove the display panel. Remove the six Phillips PM2.5×2.7 broad head screws that secure the display hinges to the display back cover. Release the outside tips of the display hinge cover (1) from the slots built into the display hinges. Remove the display hinges (2).
  • Page 62 Remove the hinge strip (2). The hinge strip is available using spare part number 829304-001. If it is necessary to replace the WLAN antenna cables and transceivers: Remove the display bezel. Remove the display panel. Release the two pieces of grounding tape (1) the secure the webcam/microphone module cable to the display back cover.
  • Page 63 Remove the WLAN antenna cables and transceivers (4). The WLAN antenna cables and transceivers are available using spare part numbers 848170-001 (for use only on computers with model numbers 13-d100 through 13-d199) and 829287-001 (for use only on computers with model numbers 13-d000 through 13-d099). If it is necessary to replace the display panel cable: Remove the display bezel.
  • Page 64 Reverse this procedure to reassemble and install the display assembly. Chapter 5 Removal and replacement procedures...

  • Page 65: Using Setup Utility (Bios)

    To decide whether you need to update Setup Utility (BIOS), first determine the BIOS version on your computer. To reveal the BIOS version information (also known as ROM date and System BIOS): Type support in the taskbar search box, and then select the HP Support Assistant app. – or –...

  • Page 66: Downloading A Bios Update

    If your computer is connected to a network, consult the network administrator before installing any software updates, especially system BIOS updates. Type support in the taskbar search box, and then select the HP Support Assistant app. – or – Click the question mark icon in the taskbar.

  • Page 67: Synchronizing A Tablet And Keyboard (Select Products Only)

    Double-click the file that has an .exe extension (for example, filename.exe). The BIOS installation begins. Complete the installation by following the on-screen instructions. NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file from your hard drive.

  • Page 68: Using Hp Pc Hardware Diagnostics (Uefi)

    Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components.
  • Page 69 Download any version of UEFI for a specific product: Go to http://www.hp.com/support, and then select your country. The HP Support page is displayed. Click Drivers & Downloads. In the text box, enter the product name, and then click Go. – or –...

  • Page 70: Specifications

    100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source that is supplied and approved by HP for use with this computer. Metric U.S.

  • Page 71: Backing Up, Restoring, And Recovering

    Use HP Recovery Manager to create HP Recovery media after you successfully set up the computer. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced. For...

  • Page 72: Using Windows Tools

    HP Recovery media can also be used to customize the system or restore the factory image if you replace the hard drive.

  • Page 73: Restore And Recovery

    Creating HP Recovery media (select products only) on page If your computer does not allow the creation of HP Recovery media or if the HP Recovery media does not ● work, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the computer.

  • Page 74: Using The Hp Recovery Partition (Select Products Only)

    Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly.

  • Page 75: Changing The Computer Boot Order

    Changing the computer boot order If your computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the order of devices listed in BIOS where the computer looks for startup information. You can change the selection to an optical drive or a USB flash drive.

  • Page 76: Removing The Hp Recovery Partition (Select Products Only)

    Removing the HP Recovery partition (select products only) HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: After you remove the HP Recovery partition, you will not be able to perform System Recovery or create HP recovery media from the HP Recovery partition.

  • Page 77: 10 Power Cord Set Requirements

    10 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.
  • Page 78 Country/region Accredited agency Applicable note number Sweden SEMKO Switzerland Taiwan BSMI The United Kingdom The United States The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used. The flexible cord must be Type SPT-3 or equivalent, No.
  • Page 79 Follow the local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/recycle.
  • Page 80 50 removal 26 display panel, product description 1 spare part number 19, 52 spare part numbers 17, 26 display switch 4 HP PC Hardware Diagnostics (UEFI) button components 5 DVD-RW Drive, spare part number using 58 buttons HP Recovery Manager...
  • Page 81 USB flash drive 64 jacks HDMI 10 using HP Recovery media 62 audio-in 9 product description 2 recovery media audio-out 9 USB 3.0 9, 10 creating 61 headphone 9 power button 5 creating using HP Recovery microphone 9 power connector 10...
  • Page 82 system restore point creating 62 system restore point, creating 61 TouchPad board removal 35 spare part number 16, 35 TouchPad board bracket removal 35 spare part number 16, 35 TouchPad board cable, spare part number 16, 35 TouchPad button 8 TouchPad components 8 TouchPad zone 8 USB 3.0 port 9, 10...

This manual is also suitable for:

13-d00013-d09913-d10013-d199

Table of Contents