Page 52 of 72
Chapter 3—Add Expansion cabinets/chassis using fiber-optic connectivity
553-3021-208
Standard 1.00
Figure 19
Power connector on the back of the chassis
3
Connect a TTY to port 0.
4
Turn the power switch to "ON".
5
Observe the TTY screen.
After the system is loaded, a menu-driven program called the
"Software Installation Program" is automatically started.
6
Go to "Install software in a Option 11C Mini system" on page 59
to install software.
—————————— End of Procedure ——————————
April 2000
Power cord
Cable tie