Nortel Meridian 1 Option 11C Expansion Manuallines page 47

Chapter 3—Add Expansion cabinets/chassis using fiber-optic connectivity
7 Connect the Primary Main Chassis and the Expansion Chassis
using glass fiber-optic cable. See Figure 15 on page 48.
a Remove the protective plug from one of the ports on the Fiber
Receiver card.
b Remove the protective cap from the corresponding glass
fiber-optic cable connector.
c Insert the cable connector firmly into the port on the Fiber
Receiver card.
d Lock the connector in place by turning it a half turn clockwise.
e Repeat this step (Step 7 on page 47) for the second glass
fiber-optic cable connection.
f Wind the excess fiber-optic cable around the cable storage device
located on the component side of the Fiber Receiver card. See
Figure 14 on page 46.
g Go to Step 8 on page 48.
Option 11C and 11C Mini
Page 47 of 72
Expansion Guide